Undermount kitchen sink – The installation of a sink is a task that, at first glance, it may seem more difficult than it actually is. No need to be a “handyman” to carry it out: just have some fondness for crafts and DIY tasks, besides time and inclination to do so. The first task is to be performed, in any case, cut the water. To do this, it is best to close the stopcock kitchen or whole house. If the cooking surface is new, it is likely to be conducted drilling to place the sink. Often, the sink packaging includes a template to be cut and placed on the counter. Thus, you can be traced in pencil on the counter on the exact line corresponding cut. So it is important to pay attention to the box to discard not before time.
Known the exact location you should have the hole for the undermount kitchen sink, it proceeds to drilling. The easiest way, if the countertop is made of wood, is to make a hole with a drill right on the edge of the track and then make the draft a handsaw tip or needle, or a jig saw mechanics, with the that the work will be much faster and easier.
12 Photos Gallery of: Undermount Kitchen Sink Install
Finished the cut, the remaining wood removed (which should not throw because it can be devoted to multiple uses, such as picture frames, the base for a centerpiece, etc.) and it is found that the undermount kitchen sink fits in the hole without drawbacks. After this check, it is removed and thoroughly cleans the entire surface of the counter.